Product Specifications
| Crystal Mark is pleased to introduce the CCR-NP16X16 Automated Conformal Coating Removal System. Originally developed for Tobyhanna Army Depot and fielded in late 2009, the CCR-NP16X16 is the first automated micro-abrasive blast system designed specifically for removing/stripping conformal coatings from an entire printed circuit board surface, up to 16” x 16”. It will also handle spot area removals when used with the Point Ionizer Handpiece for manual touch-up. The system is computer controlled with a programmable touch screen user interface. The user simply enters the area to be blasted (up to 16″x 16″), number of passes and from which side to make the passes. The system can be used in either “Sandblast Automatic” mode or “Sandblast Manual” for doing manual touch ups. |
 |
|
Crystal Mark CCR-NP 16 x 16 Automated Conformal Coating Removal System is specifically designed for full board conformal coating removal. Power: 115V/60Hz, 1 phase, 15 amps |
 |
SWAM-Blaster® Model CCR-MAX-MV2L
Turbo-Max CCR Table Top Conformal Coating Removal Workstation
| Crystal Mark new Turbo-Max CCR Table Top Conformal Coating Removal System incorporates Crystal Mark’s MV-2L Micro Abrasive Blaster, Ionized Ergonomic Work Chamber, Point Ionizer at Nozzle, along with a compact Filter System. The all-in-one workstation fits on most benches and is designed to safely and selectively remove conformal coatings, whether from a pinpoint area to an entire circuit card assembly. When used with Carbo Blast™ abrasive powder, conformal coatings can be removed without causing mechanical or ESD damage. |  |
|
Power: 115V/60Hz, 1 phase, 2 amps |
 |
 Ionized Ergonomic Work Chamber and grounded work surface provide exceptional ESD protection. |
 Use UV fluorescent light to allow for easy identification of residual conformal coating |
 Or flip switch to white fluorescent bulb to allow for normal viewing of removal process |
SWAM-Blaster® Model CCR-CWC-MV2L
ESD-Safe Conformal Coating Removal Work Cell
Crystal Mark new CCR-CWC-MV2L Conformal Coating Removal Work Cell, incorporates the MV-2L Micro Abrasive Blaster, Ionized Ergonomic Work Chamber, Point Ionizer at Nozzle and Dust Collector. The unit features all-in-one design, and is mounted on casters for easy installation, mobility and Work Cell re-configuration. It is specifically designed to selectively remove conformal coatings, whether from a pinpoint area to an entire circuit card assembly. |
 |
Model CCR-CWC-MV2L Conformal Coating Removal Work Cell, incorporates rolling cart for easy movement to anywhere needed – fits through any standard doorframe, perfect to lean environments with limited space (shown with optional Zoom Microscope). Power: 115V/60Hz, 1 phase, 15 amps Size: 26″W X 33″D X 61″H Click here to get a quote Remember, if don’t see what you’re looking for contact us so we can help you. |
 |
|
|
|
|
Abrasive Powders
for ESD-Sensitive PCB’s
There are several types of abrasives available for conformal coating removal including environmentally friendly Carbo Blast, recommended for ESD-sensitive pc boards and components. Crystal Mark Inc, provides a wide variety of powders including Aluminum Oxide, Glass Beads, Crushed Glass, Dolomite, Silicon Carbide and Soda Bicardonate used for different types of applications. Click here to contact us Remember, if don’t see what you’re looking for contact us so we can help you. |
 |