Crystal Mark, Inc. Dust Collectors

Dust Collectors

The Model 64 and Model 75 Dust Collectors provide high efficiency air cleaning. With the fan on the clean air side, dust and other collected material are filtered out by the fabric filter before reaching the fan, resulting in long, reliable performance.

The envelope filters provide very high collection efficiencies, trapping dust particles of all sizes, including those smaller than 1 micron. They are rated at 99.9% collection efficiency by weight even with high concentrations of sub micron particles in the air stream. By adding a HEPA Pack, the rating is 99.97% efficiency at 0.3 microns.

	Model 64 With Chamber Silencer	Model 75 With Chamber Silencer
number of filters:	24	24
actual filter area	60 square feet	120 square feet
blower motor:	3/4 horsepower 115V/60Hz/1 phase 230V/50Hz/1 phase	1 horsepower 115V/60Hz/1 phase 230V/50Hz/1 phase
dust storage area:	.43 cu.ft., drawer 2.34 cu.ft., hopper	.93 cu.ft., drawer 2.34 cu.ft., hopper
rating:	67 dba; 400 cfm	72 dba
standard finish:	IBM white	blue
floor space:	25-5/8" x 22-13/32"	25-5/8" x 22-13/32"
height (cabinet only):	32-7/8"+ 9.7" (Silencer)	43-19/32" + 9.7"
approximate shipping weight:	170 pounds, drawer 265 pounds, hopper	245 pounds, drawer 340 pounds, hopper
maximum # of work chambers:	1 ergonomic work chamber OR 2 microscope work chambers	2 erg. work chambers OR 1 king-size work chamber

Accessories for the Model 64 and Model 75 Dust Collectors:

Blast Gates, 3" or 4"
HEPA Pack (23.5"H)
Vacuum Kit

Dust Collectors for SWAM® Systems

Model TD486 Dust Collector

Performance: 1000 CFM at 10" total static pressure. UltraWeb cartridge filters with 486 total square feet of media. Leg/Hopper arrangement for 55 gallon drum discharge.
Dimensions: 36"W x 36"D x 130"H
DBA Rating: 90 to 100
3 Horsepower, 3 Phase

Accessories for the Model TD486 Dust Collector:

Combo Starter.
5 HP Motor.
Silencer