Swam-Blasters^®

Model EV-2 Micro Abrasive Blaster  Brass fittings throughout the abrasive pathway  A nozzle range from .007" up to .040" Model EV-2L Micro Abrasive Blaster Carbide lined fittings throughout the abrasive pathway  A nozzle range from .018" up to .060"
Model MV-2 Micro Abrasive Blaster Tilting powder tank to allow for rapid powder changes Carbide lined fittings throughout the abrasive pathway A nozzle range from .007" up to .040" Model MV-2L Micro Abrasive Blaster Tilting powder tank to allow for rapid posder changes  Carbide lined fittings throughout the abrasive pathway  A nozzle range from .018" up to .060"
Model MV-241 Micro Abrasive Blaster Tilting powder tank to allow for rapid powder changes Carbide lined fittings throughout the abrasive pathway A nozzle range from .007" up to .060"
Model LV-1 Micro Abrasive Blaster  For production lines and in the SWAM Automated Systems  An hour meter for SPC monitoring  A leak detection system for the pinch value assemblies  A separate mixing powder tank for a consistent powder feed rate from a full tank to an empty tank.  Carbide lined fittings throughout the abrasive pathway  A nozzle range from .018" up to .060"  Model XV-1 Micro Abrasive Blaster  Similar to the Model LV-1  Equipped with larger hoses and fittings throughout the abrasive/air pathway  A nozzle range .032" up to .090"
The Eco Blaster This cost effective Micro Samblaster achieves many different applications such as: etching, deburring, glass engraving, fossil preparation, and much more.

For more questions Contact Us at Toll free # 800-659-7926 or 818-240-7520
E-mail: sales@crystalmarkinc.com 


 Go to the TOP PAGE