The
POINT IONIZER™ effectively reduces the ESD from reaching
levels that could potentially cause damage to ESD sensitive
components during the micro abrasive blasting process.
Introduces
a balanced flow of positive and negative ions at the
exit point of the nozzle tip.
Abrasive powder maintains a lower ESD level upon contact
with the work piece.
The
hand piece combines the abrasive nozzle and the ionization
source. A simple grounding
point for the nozzle within the hand piece further neutralizes
the abrasive
pathway.
The
nozzle is positioned at a fixed angle to the ionization
source.
Improves
the cleanliness on surfaces where static charges can
generate
an electromagnetic field.
The
effectiveness of the Point Ionizer was proven during several
studies for conformal coating removal. Using the Carbo
Blast, Soda Bicarbonate and Plastic Blast as the abrasive
media with the Point Ionizer, the conformal coating was
selectively removed while safely maintaining ESD readings
below 20 volts (tests were conducted by blasting an electrostatic
field meter). Without the Point Ionizer, ESD charges of
3,000 volts and higher were realized.
Crystal
Mark Inc., 613 Justin Avenue, Glendale, California 91201
818-240-7520 / 1-800-659-7926 / Fax: 818-247-3574
The
POINT IONIZER™ effectively reduces the ESD from reaching
levels that could potentially cause damage to ESD sensitive
components during the micro abrasive blasting process. 
